heat exchanger tube

Extruded serrated type: with cold rolled extruded fin with longitudinal notches and inclined fin tips. Thirteen extrusion fining lines, daily capacity around 9000 meters The extruded fin gives complete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process.

Extruded fin type: with cold rolled extruded fin Thirteen extrusion fining lines, daily capacity around 9000 meters The extruded fin gives complete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process.

Copper tubes for heat exchangers after sand blasting, which coud improve the heat transfer performance

Extruded Fins / Extruded serrated Fins Finned tube is composited with iron-aluminum or copper-aluminum tube rolling out the fin, which feathers are tightness, small heat resistance, good heat transfer performance, high strength, small flow losses, strong corrosion resistant performance, not easy to deformation and a long working lifetime in cold and hot condition,etc. The fin givescomplete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process.

Extruded Fins Finned tube is composited with iron-aluminum or copper-aluminum tube rolling out the fin, which feathers are tightness, small heat resistance, good heat transfer performance, high strength, small flow losses, strong corrosion resistant performance, not easy to deformation and a long working lifetime in cold and hot condition,etc. The fin givescomplete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process. Material: Aluminum, Copper, Carbon Steel, Alloy.etc. ASTM A106/A53,ASME SA210,ASTM A213,ASTM A179/A192

Extruded Fins / Extruded serrated Fins  Finned tube is composited with iron-aluminum or copper-aluminum tube rolling out the fin, which feathers are tightness, small heat resistance, good heat transfer performance, high strength, small flow losses, strong corrosion resistant performance, not easy to deformation and a long working lifetime in cold and hot condition,etc. The fin givescomplete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process.

LL-type finned tube makes the trapezoidal cross-section forming by rolling combine closely with the heat flux density distribution size. The fins combine tightly with the tube,which makes the thermal efficiency higher and put an end to thermal resistance that brings by the non eliminate contact from segment gap of the string type finned tube. 1 Features: The winding technology improves production efficiency and heat transfer, makes the average fin pitch and higher proportion between fins and tube. At the same time, the base tube can be protected from air erosion. 2 Application: LL-type finned tube mainly used in petrochemical, electric power, paper making, tobacco, building heating and other industry such as air cooler, air heater and air heater of food industry, plant starch spray drying system. The fin is wrapped around the tube with an overlapping foot and secured at each end. Gives good surface protection to the tube. Used for moderate temperature coolingapplications. Material: Copper, Carbon Steel, Copper Stainless Steel, Alloy, Aluminium Bare tube OD: 15.88-45mm Fin Pitch: 2.1-5.0mm Fin Height: <16mm

Extruded serrated type: with cold rolled extruded fin with longitudinal notches and inclined fin tips. Thirteen extrusion fining lines, daily capacity around 9000 meters The extruded fin gives complete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process.

Extruded Fins / Extruded serrated Fins Finned tube is composited with iron-aluminum or copper-aluminum tube rolling out the fin, which feathers are tightness, small heat resistance, good heat transfer performance, high strength, small flow losses, strong corrosion resistant performance, not easy to deformation and a long working lifetime in cold and hot condition,etc. The fin givescomplete protection to the base tube and is much stronger than the applied type due to work hardening of the fin material during the extrusion process. The inspector should carry out visual inspecton of the finished finned tubes at 10% random rate,the tubes should be clean with no residue left from the finning process and no swarf between them. The dimension inspection for finished finned tubes should be conducted in accordance with fin tube drawing. At 10% random rate, the inspection contents are overall length, finned length, bare end length, middle bare tube length, fin tube out diameter, fin heigh, fin thickness , fin pitch, all measureed values for dimension should beaccording to the drawing.